Description:
ASML Navaigation's MIOC-S chip is a key component in Fiber Optic Gyroscope (FOG) for measuring angular velocity of an inertial navigation system. This integrated device, fabricated on Lithium Niobate (LiNbO3) material, is composed of a polarizer, a Y-junction coupler and dual electro-optical phase modulators. Waveguides on the chip are produced by the High Temperature Proton Exchange (HTPE) process. The MIOC-S has more than 60dB Polarization Extinction Ratio (PER) and can minimize bias drift resulting from
polarization crosstalk induced non-reciprocity. This MIOC-S device has been used in a high-sensitivity inertial navigation system to detect less than 0.5 deg/hour angular velocity change. It has highly reliable performance with wide temperature range tolerance.
Features:
➤ 1550 ± 20 nm operation
➤ PM fiber input and output port
➤ Polarization extinction ratio > 60 dB
➤ Vπ voltage < 3.5 V
➤ Fiber/chip crosstalk < -23 dB
➤ Low fiber-to-fiber insertion loss
➤ Push-pull electrode design
Applications:
Fiber optic gyro system
Fiber communication system
Fiber sensor system
Parameters with Room remperature(15℃-35℃)
Parameter | Unit | Values |
Wavelength | nm | 1550 |
Insertion | dB | ≤4.0 |
Half wave Voltage(@100KHZ) | V | ≤4.5 |
Splitting Beam Ratio | - | 48/52－52/48 |
Optical Return | dB | ≥50 |
Polarization extinction ,chip | dB | ≥55 |
Additional Intensity Modulating | - | ≤0.2% |
PM Pigtail Crosstalk | dB | ≤-30 |
Electrode type | - | Push-pull modulating |
Bandwidth | MHz | ≥300 |
Pigtail type | - | PM |
Wave slope | - | ≤1/250 |
Electrode voltage | V | ≤15 |
Max input power | mw | ≤200 |
Work temperature | ℃ | -45～+70 |
Packaging dimensions | mm | 30X8X5 or 35X10X5 |
Parameters with full temperature
Parameter | Unit | Typ Values |
△Insertion | dB | ≤0.5 |
PM Pigtail Crosstalk | dB | ≤-25 |
△Splitting Beam Ratio | % | ≤3 |
Different grades Parameters Comparison
Items | Parameters | Unit | Typ Value |
|
A Grade | C grade |
|
|
|
1 | PM Pigtail Crosstalk | dB | ≤-27 | ≤-23 |
2 | Operating temperature | ℃ | -50-+75 | -45～+70 |
3 | △Splitting Beam Ratio | % | ≤3 | ≤5 |
4 | △Insertion | dB | ≤0.5 | ≤0.5 |
5 | △Half wave Voltage | % | ≤5.0 | ≤7.0 |
Recommend Modulation Wave(Amplitude Value:≤3.5V)
Chip structure
Package Size
Ordering information
Type | Description | Grade |
|
MIOC-15-09-09-N | 1550nm integrated optical chips ( Y waveguide) input/output: 125/250um PM fiber, 1m fiber length, without connector | C Stands for commercial grade | A stands for aerospace grade |
MIOC-15-09-80-N | 1550nm integrated optical chips ( Y waveguide) input: 125/250um PM fiber, output with 80/165um PM fiber, 1m fiber length, without connector | C Stands for commercial grade | A stands for aerospace grade |
Aerospce grade’s MIOC with full temperature testing and all conditions’s testing.
We can provide different pigtail and package by customer requirement.
For more information on this or other products and their availability, please contact us:info@idealphotonics.com
Operation Instructions
a). If the devices work under the single state of polarization, the polarization state of input light must conform to devices.
b).Avoid the Electrical damage of the devices; the electrode voltage of modulators should be lower 30V.
c) .Applying too much force to fiber may cause it broking easily. Avoid drawing、twisting.Bending radius must not be less than 30nm.
d) Avoid too much force between metal tube and fibers. Put up the tube and the fibers together when using it. Avoid bending at the joint of the tube and the fibers.
e) Storage environment humidity must be less than 50%, and not contain the materials which damages devices.
f) Avoid the devices suffering from intense thermal shock and inhomogeneous by heated
g) Avoid stressing to the joint of the fiber connection circuits.
