Description:
ASML Navaigation's Pin-fet Hybrid receiver design is based on a hybrid assembly of a PIN photodiode and a high impedance FET preamplifier. This approach provides the best receiver sensitivity whilst offering potentially greater reliability than alternative receiver concepts. The PINFET provides an excellent solution for optical receiver systems that require both high sensitivity and wide dynamic range. Applications include telecommunications line terminating equipment or repeaters and optical sensor systems where a user adjustable gain may be desirable for optimizing system performance.
Features:
InGaAs PIN detector plane structure
Fixed transimpedance amplifier circuit
Operation wavelength of 1100nm ~ 1650nm
14needle shallow cavity dual-in-line package
SM or PM fiber coupled,FC/PC FC/APC connector optional
Full temperature storage testing
Full temperature operating testing
Applications:
Fiber optic gyro system
Fiber communication system
Fiber sensor system
Specifications@ 25℃ (+/- 5.0 VDC)
Type | Bandwidth*(MHz) | Sensitivity (dBm) | Transimpedance(Kohms) | Dynamic range (dB) | Noise (mV) |
ASML0030 | 180 | -40 | 70 | 25 | 0.1 |
ASML0070 | 120 | -43 | 30 | 25 | 0.1 |
ASML0010 | 60 | -45 | 10 | 25 | 0.1 |
ASML0040 | 40 | -49 | 40 | 25 | 0.1 |
ASML0060 | 30 | -50 | 60 | 25 | 0.2 |
ASML0400 | 12 | -52 | 400 | 25 | 0.3 |
ASML0800 | 8 | -54 | 800 | 25 | 0.5 |
ASML1200 | 6 | -55 | 1200 | 25 | 0.7 |
ASML1400 | 4 | -56 | 1400 | 25 | 0.9 |
NOTE:
From July 2017 We accept higher bandwidth at 450MHZ( Data rate 622M);900MHZ(Data rate 1.25G);1700MHz(Data rate 2.5G) OEM service.Min qty:10pcs Please contact us for more details: info@asmlnavigation.com
Parameter @25℃ (+/- 5.0 VDC)
Parameter
| Symbol | Unit | Min | Typ | Max | Test condition |
Electrical Characteristics |
Rate | - | Mb/s | 2 | - | 280 |
|
Transimpedance | - | KΩ | 30 |
| 8000 |
|
Detector dark current | Id | nA | - | 0.2 | 5 |
|
Output impedance | Ro | Ω | - | 50 | - |
|
-3dB Bandwidth | BW | MHz | 1 | - | 180 |
|
Output voltage | Vout | mVp-p | - | 1000 | 1200 | RL=50Ω |
Optical Characteristics |
Sensitivity | S | dBm | -56 | - | -39 | NRZ BER=10-9 |
Sensitivity vs temperature | - | dB | - | 1 | 1.5 | 20℃~65℃ |
Overload | Pin-max | dBm | -3 | - |
|
|
PIN Responsibility | R | A/W | 0.9 | - | - | λ=1310nm,Vr=-5V |
0.95 | - | - | λ=1550nm,Vr=-5V |
Wavelength range | λ | nm | 1100 | - | 1650 |
|
+5 V Operating current | IOC+5 | mA | - | 25 | 35 |
|
-5 V Operating current | IOC-5 | mA | - | 10 | 15 |
|
Absolute Maximum Ratings
Parameter | Symbol | Unit | Min | Max |
Storage Temperature Range | Ts | ℃ | -40 | 85 |
Relative Humidity | RH | % | - | 85 |
Positive Power Supply Voltage | Vcc/Vee | V | - | 6 |
Negative Power Supply voltage | Vcc/Vee | V |
| -6 |
Reverse Detector Bias Voltage | - | V | - | -15 |
Forward Current | If | mA | - | 2 |
Reverse photoCurrent | Ir | mA | - | 5 |
Fiber coupled power | Pin | mW |
| 5 |
Lead Solder Temperature | - | ℃ | - | 260 |
Lead Soldering Time | - | s | - | 10 |
*The sensitivity is calculated by using the PINFET transimpedance, the noise voltage (which is RMS of no light input) and the PIN responsivity. And it is at the conditions of room temperature and NRZ code Bit Error Rate better than 10-9.
Recommended Operating Conditions
Parameter
| Symbol | Unit | Min | Typ | Max |
Case Operating Temperature Range | Tc | ℃ | -20 |
| +70 |
Operating Voltage | VOP | v |
| ±5 |
|
14pin Package
Mini 8pin SK-DIP package
Pin definition
Pin | Definitions | Pin | Definitions |
1 | -5V（Bias Voltage） | 8 | Grounding |
2 | NC | 9 | NC |
3 | Grounding | 10 | +5V Power Supply |
4 | -5V Power Supply | 11 | NC |
5 | Grounding | 12 | NC |
6 | NC | 13 | NC |
7 | Signal Output | 14 | NC |
8 pin
Pin | Definitions | Pin | Definitions |
1 | NC | 5 | -5V Power Supply |
2 | -5V Power Supply | 6 | Signal Output |
3 | Grounding Power Supply | 7 | Grounding Signal |
4 | +5V Power Supply | 8 | Case |
PIN-FET Hybrid Receiver Working Theory
PIN-FET Designed by ASML Including two mainly electronic part-byway Detector and operational amplifier circuit(OAC).The Byway detector is PD Which Converts an optical signal into an electrical signal,The OAC is mainly used to amplify the PD converted electrical signals to achieve an ideal output signal.
The schematic diagram of the working Theory is shown in the following figure:
Ordering information
ASML | -Transimpedance | -Fiber Type and Connector | -Package Type |
| 1200:1200KΩ | SP:SM Fiber,FC/PC Connector | D14:DIP14 |
| 0800:800KΩ | SN:SM Fiber,None connector | D08:DIP8 |
| 0600:600KΩ | SA:SM Fiber,FC/APC Connector | MD08:MINI DIP8 |
| 0400:400KΩ | PA:PM Fiber,FC/APC Connector |
|
| 0060:60KΩ | PP:PM Fiber,FC/PC Connector |
|
| 0040:40KΩ | PN:SM Fiber,None connector |
|
