Description
ASML Navigations’s RLG-10K-3K-1-100 Ring laser gyro High voltage Power supply Module employs the highest precision Current Control technology. It is a small, lightweight, high performance High voltage output, suited for navigation, stabilization and flight control Ring laser gyro developed. RLG-10K-3K-1-100 High voltage module can easily be triggered by 3000V Voltage and output with a steady 10KV High voltage. At the same time we have a high precision dual channel small and high precision value Current. Which has a small deviation＜100nA.
Features
Excellent cost to performance ratio
ITAR free
Internal temperature sensor
High Voltage Output
Ultra High resolution
Applications
Inertial navigation systems;
Precision leveling and measuring systems;
Gravity meters
Ring Laser Gyro
High Voltage Power Supply Specs
Parameters | values |
Part Number | RLG-10K-3K-1-100 |
Input Voltage | DC12V±1V |
Output Voltage Range | Strat Voltage DC+3000V Cathode voltage:DC-1000V |
Output current | 0.1/2.5mA |
Voltage adjustment rate | ≤ 0.1 % |
Load adjustment rate | ≤ 0.5 % |
Time drift | ≤ 0.1 %/h (30 minutes after startup) |
Temperature drift | ≤ 0.1 %/℃ |
Output Voltage Regulation Mode | Fixed |
Adjustable total current | 0.47mA-1mA(regulated by current potentiometer) |
Start/stop mode | High start 5 V/low stop 0 V |
Protection mode | Current limiting type |
Input and output grounding mode | Common Ground (case to Input Ground) |
Current difference between two branches | < 100nA |
Leading-out Mode | Module lead type |
Operation Temperature | - 40 ℃～ + 85 ℃ |
Dimension | 70*50*25（mm） |
CONNECTOR PIN DEFINITION
Pin
| Function | Unit | Value |
1 | Anode 1 | mA | 0.5-1mA/1KV |
2 | Anode 2 | mA | 0.5-1mA/1kv |
3 | High Voltage GND |
|
|
4 | Cathode |
|
|
5 | Control Trigger Voltage | V | 3K |
6 | Control current stabilization | V | 1K |
7 | GND |
| CASE Ground |
8 | Input Voltage | V | DC 12±1V |
Note:
1.The current is to be divided equally between anode 1 and cathode and anode 2 and cathode to<80nA difference.4 wires, one for cathode, two for two anodes, one for ground
2.Dimension：75*50*25.4mm
3. Customer Can adjust the potentiometer at the top of the box when the power is on and in operation to Control the output Current Value.
4. The output voltage is high. When installing or wiring, attention should be paid to the insulation between the output terminal and the surrounding low-voltage circuit, and appropriate spacing should be maintained.
5. No long-term short-circuit or fire-fighting is allowed.
6. The Warranty Period is two years.
